Carrying Out Electrical Repairs Inside Your Home

You may well find this article helpful in locating wires and troubleshooting problems because the major strategy in finding and fixing electrical problems is to identify a position where there is no problem and then keep cutting down the distance between that point and the problem point.

When working with an electrical problem, increase your safety by taking simple safeguards. Turn off the breakers to any section in which you are working. Use an outlet tester to check that the power is actually off before touching any wires. Electrical repairs are more fun throughout the day. Trying to squeeze in an electrical repair in the late afternoon or evening can make for a long night of juggling torches, extension cables, ladders and tools. Waiting 18 hrs to start the following morning is almost certainly the best suggestion.

When fitting a switch, make sure it is on the correct conductor. You don’t want to be fitting a light fixture with a switch on the neutral wire. If you’re lucky, when you switch the breaker on, all that happens is that it will trip and frighten you. Renewing existing components is generally easy enough but, put objects back the way you found them and you should be ok. Conversely, adding new equipment can be a more difficult task to take on. Be especially careful with any wires that aren’t white, grey or green. In one home that I worked in, some very strange electrical work (probably not done by an electrician). I had the horrible surprise of finding cut (but not capped) black and red wires. I think they were probably planned for a hot tub installation. I carried out a quick test on them only to find out that they were actually live giving out 220 volts. Frightening to say the least! If I am in any doubt of what I am I always call on the help of an electrician london company.

My advise is that if you have inquiries on this subject matter, at least visit a book store or do some research on the world wide web and buy or read the NEC guide for residential wiring. An electrician may cost you some cash, but a do-it-yourself repair could cost you your property and/or your life.

Discussions about the better brand names of tools can get incredibly heated, with well meaning people holding very firm opinions. My own individual feeling on this subject is that it is essentially almost not possible to know for sure which is better. Even with the wherewithal of a full testing laboratory, the developing and design specifications vary so often, that the results are out of date prior to publication. If you happen to come across a sale where you can buy some other brand for less, then by all means do it.

The appropriate tools can make the job go much more quickly. Though many brand name tools are costly and there are lots of options. There is always trade-offs between price and quality. If you don’t have the knowledge, it can be awfully hard standing in the hardware depot trying to figure out what you really require. My foremost goal with this article is to enlighten people to this one major point, if you are not sure in relation to what you are doing with electrics then leave well alone and hire an electrician.

Why Plumbers Are More Skilled Than Any Other Domestic Professional

For everyday home maintenance, there are a number of familial service experts, whom you call in at your place. Plumbers and electricians are two such important servicers, who are often called in for various maintenance tasks at your home or office.

Why Plumbers are More Skilful:

In the article, I’ll try to put some points in favour of plumbers – why they are more skilled than other home service experts. Check out some of the following facets –

They Save Your Money –

Well, you might think that every domestic service provider has the same motto. Let us talk about their close counterparts, electricians – they, too, work for saving your money – they fix and repair your electrical equipments – they check for the irregularities in the power supply so to save you from heavy electricity bills. But, their work style is different from plumbers. Plumbers have a different approach and a wider area to work for. They work with a wider approach to save your money, by fixing, repairing, installing, and revamping the sanitary stuffs, water supply and all the water supply equipments at your home and office. They, in short, flush out all the irregularities, related to the water supply. If you call them at the right time, they can save a big amount of your valuable money.

They Work for the environment –

It is another great aspect in favour of plumbers! They work against the wastage of water, and make a huge contribution toward the nature. As we all know, there is a limited amount of water left in earth’s crust; it is needed to be saved for coming generations. You should call your nearest plumbing service providers, as soon as you notice any leakage and indiscretions in the water supply of your bathroom and kitchen. No other domestic helpers strive as hard for the betterment of nature as plumbers do.

They are always ready to help you –

Most plumbers offer their services round the clock. They are available at your service, whenever you call them. You can easily find a plumber in your area even in late midnight hours. They are always ready to help you.

They Do Not Charge Much –

Even if you have called them in awkward hours, they never ask for heavy service charges. They have nominal service fee, which never hits your pocket. However, if you feel they are charging more than the work they have carried out, you can negotiate with them over their asked price. Alternatively, you can negotiate and set the service charge over the phone, before calling them at your place.

Electrical Faults Which Are Prone To Affect The Home-Based Electrical System

This article is designed to offer you some valuable information on common inadequacies within a domestic electrical installation.

Although electrical Inspections are usually conducted by any competent electrician with the correct equipment, remedial works, particularly notifiable ones will need to be conducted by a part P qualified electrician and the appropriate building controllers notified.

Should your electrician be a member of any of the below competent persons schemes, they are allowed to self certify the installation.

Competent persons schemes members.

British Standards Institution (BSI)

EC Certification Limited / ELECSA

NAPIT Registration Limited (National Association of Professional Inspectors and Testers)

NICEIC Group Limited

Common fault No.1 – Lack of RCD protection on fuseboard.

One of the commonest defects with domestic electrical systems is the lack of RCD protection on your consumer unit. The latest Wiring Regulations BS 7671 came into force at the end of June 2008, requiring a lot more extensive provision for RCD (residual circuit protection) of both domestic and non-domestic dwellings. The practicalities of meeting those requirements for protection are varied and too numerous to list within article but examples of the implications are below.

All power sockets sockets from 13Amp – 20Amp to be used by ‘ordinary persons’ should normally be protected by a 30mA RCD.

In bathrooms for instance RCD protection is now required for all circuits.

In summary, you will discover a number of approaches to fuse board design to fulfill the latest regulations, some of which utilise traditional RCD main switch consumer units and split load consumer units, whilst others rely on the new style of dual RCD protected consumer units. In general the use of RCDs and RCBOs is now greater and there is mostly a trend towards larger consumer units with more ways available.

Common fault No.2 – Partial or incomplete bonding.

Electric shocks attributable to faulty appliances and charged metallic objects may be fatal. Therefore it is of paramount importance all metallic items like gas and water pipes within a property are properly earthed in order for electricity to be dispersed safely. Bonding is the term used for connecting all metallic items that usually do not normally carry a current (pipes etc) within a property, and to the mains earth to prevent electric shocks.

In each electrical installation, mains bonding conductors(earthing wires) are required to connect to the main earthing terminal for the installation of these following items:

metal water service pipes
metal gas installation pipes
other metal service pipes and ducting
metal central heating and air con systems
exposed metal structural parts of the building
lightning protection systems

Common fault NO.3 – Inappropriate fittings in bathroom.

For Electrical safety, bathrooms pose a higher risk of electrocution due to the proximity of water. Electrical appliances commonly found here will need to demonstrate higher levels of protection in compliance with section 601 in the new wiring regulations.

Lighting
Extractor fans
Shaver sockets
Towel rails
Electrical equipment used in bathrooms must not be adversely effected by environmental factors.
Condensation
Humidity/steam
Drops of water
Sprays from showers